Varaoke International Oy

http://varaoke.eu/products/paper-machines/paper-machine-3300mm-170t-24h-speed-max-600mmin/

A register description in accordance with Section 10 of the Personal Data Act (523/99)

1. Register holder
Varaoke International Oy
Business ID: 0925191-4
Kullervonkatu 20 B 112
33500 TAMPERE
Tel: +358 10 292 2090

2. Contact person in matters relating to the register
Harri Aikio
Kullervonkatu 20 B 112
33500 TAMPERE

3. Register name
The marketing and analytics register of Varaoke International Oy

4. The purpose of handling personal data
The purpose of the register is to take care of the customer relationship between the register holder and the customer, as well as marketing and communications. The management of the register and the handling of the data can be outsourced to the co-operative partner of the register holder, who has committed to complying with this register description.

5. The data content of the register
The register may contain the following information about the customer:
– Name
– Telephone number
– Address
– E-mail address
– The name and business ID of the organisation
– Contact log

6. Data sources in compliance with the regulations
The register is compiled from the register holder’s customer information system and the visitor tracking tool on the site, publicly available Internet sources and other public sources, both free and payable ones.

7. Passing on of data in compliance with the regulations
The register holder will not pass on the data to outside parties except for the co-operative partner of the register holder mentioned in point 4, unless actions by the Finnish authorities require it to do so.

8. Transferral of data outside the EU or EEA
As a rule, personal data is not transferred outside the European Union or European Economic Area.

9. The principles of the protection of the register
Personal data is kept confidential. The data network and equipment of the register holder and its possible data technology partners, where the register is located, are protected with a firewall and other necessary technical measures.

10. Cookies
Cookies may be used on the pages of the register holder to improve the user experience. A cookie is a text file which is saved on the user’s computer when they visit the web page. It contains information and it is used, amongst other things, to develop marketing and the site. Cookies do not establish the identity of the user. The user can delete cookies from use with the browser settings. The register holder does not guarantee that the site will work correctly after cookies have been deleted.

Sulje [x]

PAPER MACHINE 3300mm, 170t / 24h, speed: max. 600m/min

This product is not available at the moment. Please contact our customer service for more info.

    Print this page
  • Product ID: VAK10660
  • Name: PAPER MACHINE 3300mm, 170t / 24h, speed: max. 600m/min
PAPER MACHINE 3300mm

* Producing writing and printing papers also coated papers.



PRODUCTION DETAILS

1 Second-hand Paper production line:


Make BRUDERHAUS-VOITH
Year of Make 1964. Last major rebuild in 1999
Type Fourdrinier / 1st floor
Working Width 3400mm
Trimmed Sheet Width 3300mm
Capacity 170t/24h
Working Speed max. 600m/min

Paper Grade
one-side coated fine paper,
poster paper,label paper, carbonless
paperand coated technical papers
Basis Weight Range 60 – 170g/m²
Drive side left, seen in paper run direction




STOCK PREPARATION


Stock Preparation, Broke System and Approach Flow for fresh fibres and wet strength broke:

1 Pulper, 14m³, make WOLFF, Germany, year 1964, stainless steel tub, 3000mm diameter, batch operation, consistency 7%, with V-belt drive, 200kW, including horizontal bale conveyor 5800mm long, 1200mm width

1 Pulper, 14m³, make BRUDERHAUS, Germany, year 1981, stainless steel tub, 3000mm diameter, batch operation, consistency 7%, with V-belt drive 300kW, including 2 horizontal conveyors 5800mm long, 1200mm width

1 High-Consistency Broke Pulper, capacity 2t/h, make LAMORT, France, year 1991, stainless steel tub, 3000mm diameter, batch operation, consistency 17%, for the pulping of wet strength paper, including 2-part inclined bale conveyor 7900mm long, 1900mm width, with v-belt drive with motor. Conveyor belt equipped with inline reel splitter with 2000mm width for reels with max. 1000mm diameter



1 Broke pulper, stainless steel, make GRUBBENS, 7% consistency, 4000mm width, 2400mm length and 1500mm height, single rotor, v-belt drive with motor

1 Couch Broke Pulper with stainless steel tub, make BRUDERHAUS, rotor, v-belt drive with motor

1 Dry Broke Pulper with stainless steel tub, make BRUDERHAUS, rotor, v-belt drive with motor

3 Tanks 10m³ each, made of stainless steel

6 Chest agitators, side entry, make VOITH, rotor diameter app. 600mm, v-belt drive with motor

1 Deflaker, make SUNDS, year 1999, type Delflo TM, motor 280kW, 1480rpm

1 Vertical-Screen, make SUNDS, year 1999, type Delta-Screen, incl. drive



2 Conical refiners, make CLAFLIN, Type 202, with DEVELOMAX fillings, incl. drive with motor 250kW

3 Double-disc refiners, make VOITH, Type SDM1, incl. drive with motor 400kW, 1050Rpm. Disc design type 5.5.1

1 Drum Thickener, stainless steel vat, cast iron ends, compression design, stainless steel wire cover, 1220mm diameter, 4200mm length, incl. constant speed motor with gearbox

1 Fibre Recovery Flotation System, make BERICA, year 1997, Type CF200, stainless steel tank split in 3 sections bolted with each other

1 3-stage Centri-cleaner system, make VOITH, type KS-200. 1st stage 17 cones, 2nd stage 4 cones, 3rd stage 1 cone incl. fibre saver

1 Pressure Screen, make VOITH, year 1987, type GR20, stainless steel body, basket with holes, incl. drive

1 Reject vibrating screen, make VOITH, type 1000 with perforated screen

1 Basis weight control valve, make DEZURIK


* Including all tanks, chests, agitators, pumps, valves,
control valves, pipes and instruments for measuring and control




PAPER MACHINE

1 Hydraulic Headbox, make VOITH, Type W-7500, 3700mm slice width, with tapered manifold, year of make 1981, with automatic top lip profile control by ABB, installed in 1998

1 Wire Part, make VOITH-DÖRRIES, cantilevered, made of stainless steel



Wire part equipped as follows:

* Breast roll 450mm dia with rubber cover and shake device
* Forming board made of SS with ceramic cover and ceramic foils
* 1 Foil box, made of SS, with 7 ceramic foils
* 3 Foil boxes, made of SS, with 3 ceramic foils each
* 3 Foil boxes, made of SS, with 2 ceramic foils each
* 1 Vacu-Foil box with 6 ceramic foils
* 1 Wet suction box with slotted HDPE-cover
* 1 Dandy Roll 1200mm diameter, make NORDISCA, wire screen
make NEF,including cleaning shower and drive


* 1 Wet suction box with slotted HDPE-cover
* 1 Single Foil, made of ceramic
* 9 Wet suction boxes with slotted HDPE-cover
* 1 Couch tail cutter, automatic with 2 needle jets
* 1 Suction couch roll 700mm diameter with bronze shell
* 1 Forward drive roll, 480mm dia with hard rubber cover
* 1 Wire HP-cleaning system, Type PERMAJET
* All wire rolls, rubber covered
* 1 Pneumatic wire guide, make SCHWARCK
* 1 electric wire stretcher
* All low and high pressure showers



PRESS PART

Make VOITH-DÖRRIES, with suction pick-up press roll, 905mm diameter, rubber covered, and central press roll 900mm diameter for the 1st nip with app. 65kN/m nip load, 2nd nip by crown controlled NIPCO-roll 500mm diameter with 90kN/m linear nip load, 2nd press with rubber covered crown-controlled Nipco top roll and bottom press roll with 110kN/m nip load, 3rd press as offset press with rolls 590mm diameter. Press Part complete with 2 felt runs and all felt conditioning equipment



DRYER PART

* Make BRUDERHAUS, with total of 37 drying cylinders
* 25 Dryers 1500 mm diameter in the pre-dryer part
* 1st group with 5 cylinders in slalom felt


2nd to 5th group with 4 drying cylinders each with top and bottom felt6th group with 5 dryers in the after dryer part. The 1st cylinder in this group ischrome plated

* 7th group with 7 dryers in the 2nd after-dryer part


The drying cylinders are designed for 3.5 bars steam pressure and are allequipped with Johnson-Rotary Sifons and Johnson steam joints on the tenderside. Drying Cylinder Bearings equipped with central-oil lubrication system.


All dryer groups complete with cleaning doctors (stationary), grease-lubricatedfelt rolls, felt guides and felt stretchers. Up from the 2nd group equipped pocketventilation (Madeleine rolls)

Closed dryer part hood with electrically operated lifting doors on the 1st floor leveland curtains in the basement, including all ventilation and extraction fans.

Steam for the drying cylinders is supplied by a Cascade-type steam andcondensate system with 3 stages


* 1 Breaker Stack
* 1 QCS Measuring Frame, make ABB, type SMART PLATFORM
with traversing scanner for measuring of moisture
and basis weight profile


1 Speed Sizer, Make VOITH, year 1997, suitable for the application of starch and pigments up to 10g/m², including air turn, IR-Dryers make KRIEGER and complete starch preparation

1 QCS Measuring Frame, make ABB, type SMART PLATFORM with traversing scanner for measuring of moisture and basis weight profile

1 Coater Type BILLBLADE, make BELOIT, with profile controlled blade applicator, complete including coating colour preparation, make CELLIER, suitable also for the preparation of carbonless coating colour

1 Soft Calender, make KUSTERS, type: MAT-ONLINE BACK-TO-BACK, year 1991 with a nip pressure of 100kN/m, 2 heated bottom rolls and 2 crown-controlled top swimming rolls

1 Quality Control System, make ABB, for basis weight and moisture profile measurement, jet wire ratio, opacity and smoothness


* 1 Pope Reel including reel spool magazine.
Max. Reel diameter 1800mm
* 1 Reel spool stand with 8 reel spools
* 1 complete machine multi-motor drive, make GEC-ALSTHOM for the
paper machine including modern drive control make ABB




FINISHING HOUSE EQUIPMENT

1 Slitter Rewinder, make VOITH, Type 65 ML, year of make 1992, with 8 slitter knifes, including new control system installed in 2006 and edge trim removal system with baling press. Max. unwind and rewind diameter 1800mm. Twin-drive motor 120kW, brake generator 120kW. Fan for edge trim removal

* Coating and Starch Preparation System

* 4 stainless steel tanks with vertical agitators.
3 with 150m³ and 1 with 75m³

* 5 Expansion tanks for Latex, 4 with 25m³, 1 with 30m³
* 1 Mixer, make CELLIER, 5m³
* 1 High-shear Mixer, make CELLIER, type Revicell,
for carbonless coating, with stainless steel body

* 1 Starch Cooker, make CELLIER, jacketed,
made of stainless steel

* 2 tanks 3m³, made of stainless steel
* 10 additive tanks with computer controlled dosing pumps
* 1 Tank for Speedsizer, 7m³, made of stainless steel
with top entry agitator

* 3 Tanks for Bill-Blade Coater, 10m³, made of stainless steel,
with top entry agitators

* 2 Tanks for Bill-Blade Coater, 1m³, made of stainless steel,
with top entry agitator

* 4 Vibrating Screens, make CELLIER, model 12, 1200mm diameter,
made of stainless steel with wire mesh cover

* 2 Vibrating Screens for Speedsizer, make CELLIER, model 12,
year 1997, made of stainless steel

* 3 Filter Cells, make CELLIER, type 550 OCS (2) and
400 OCS (1) with slotted baskets

* Including all tanks, pipes, pumps, motors, valves,
instrumentation and control



1 complete vacuum system with:


1 vacuum pump: make NASH, type CL2001
1 vacuum pump: make NASH, type CL3002
1 vacuum pump: make NASH, type CL3001
1 vacuum pump, make SIEMENS



* Set of spare rolls and spare parts
* 1 Control System, make ABB, year 2003
* Spare Parts: included as far as available
* Technical Documentation: included as far as available

- Double-Disk Refiner
- Lamort Helico Pulper
- VOITH Pressure Screen DEZURIK Basis Weight Valve
- VOITH W-Type Headbox Wire Part Couch Roll and Press Section
- VOITH Compact Press with 2 Nips VOITH 2nd Press
- BRUDERHAUS Dryer Part VOITH Speedsizer

- BELOIT Billblade Coater with QCS-Scanner
- KRIEGER Infrared-Dying and Air-Turn
- KUSTERS Back-to-Back Mat-Online Calender
- BRUDERHAUS Pope Reel
- GEC-ALSTOM DCS Multi-Motor PM-Drive
- NASH and SIEMENS Vacuum Pumps
- CELLIER Coating Colour Preparation



REWINDER

VOITH rewinder slitter, type 65 ML, 3450mm, year 1988, shaft unwind with brake generator, twin motor drive and rewind diameter 1500mm, shaftless rewind with various core diameter chucks.

Single overhead crane with two 10 ton lifts.

All fields marked with * are required.


Are you? End customerDealer

Please enter the characters from image below

captcha

Privacy Policy