Paper Machine Fourdrinier 2900mm, 180tpd, 50-300g/m² Coloured fine paper
This product is not available at the moment. Please contact our customer service for more info.
Print this page
- Product ID: VAK10416
- Name: Paper Machine Fourdrinier 2900mm, 180tpd, 50-300g/m² Coloured fine paper
Year of make :1961
Major rebuilds :1991 rebuild of wire part and new
Control and new hood
:1998 new film press and drying
:2000 new pope reel
|Working Width at Pope||2900mm|
|Max. Operating Speed||450m/min|
|Paper Grade||Coloured fine paper|
|Basis Weight Range||50 – 300g/m²|
|Drive side||Left-hand in running direction|
|Raw Material||Virgin Pulp|
* 1 Bale conveyor, 4-part, horizontal
* 1 Pulper, make BLACK CLAWSON, 4200 mm diameter,
made of stainlesssteel, with perforated screen
plate and rotor type Volkes
* 1 side-entry agitator for pulper dump chest made of concrete
* 3 side entry agitators for storage chests made of concrete
* 1 Broke chest, made of stainless steel chest with side entry
* 2 double-disk refiners, make ALLIBE, 28” with 370 kW motor in
a sound-proof cabinet
* 2 Conical refiners, make ALLIMAND, type GR3
* 1 double-disk refiner, make VOITH, year of make 1988, type 1F2E
* 1 Stainless steel chest, 60 m³ complete with stainless
Approach Flow System
* 1 side-entry Agitator for machine chest made of concrete.
* 1 L.D cleaning system, 4-stage. 1st stage 4 cones, make
CELLIER,made of stainless steel with ceramic inlays,
2nd and 3rd stagewith 28 cones each, make CELLECO, made
of PE,4th stage with2 cones,make CELLIER incl.fibre savers.
* 1 Pressure screen, make LAMORT, type SP 800, with basket 0.4 mm
* 1 fibre recovery system, make EDAM SUD, for white water fibre
recovery with stainless-steel conical tank incl. fibre
* 1 Micro filter screen, make ALBANY for shower water.
Broke Handling System
* 1 Couch and Press Broke Pulper
* 1 Dry-Broke Pulper
* 1 High-Consistency Pulper, make LAMORT, with HELICO-rotor,
conveyor belt and integrated reel guillotine, make TAHRAN
* 1 Broke cleaning system with HD cleaner, make VOITH,
* 1 Deflaker, make VOITH, type 1E
* 6 Water-ring vacuum pumps incl. motors and separators
Pressurized headbox, make ALLIMAND, with rectifier rolls and process controlled top lip cross profile adjustment.
Roll-out design, make ALLIMAND, year of rebuild 1991, made of
fabricated steel lined with stainless steel,15m length,
equipped with double-action breast roll shake,forming board
with PE-foils,1 foil boxes with 5 PE-foils, 1 table roll,
2 dewateringboxes with 1 foil each with PE-cover,
1 table roll, 2 single foils, 1 table roll, 4 single foils,
2 foil-boxes with 3 foils each,1 vacuum box, 1 dandy roll
1250mm diameter incl. cleaningshower, 5 suction boxes with
PE-covers,1 driven suction couch roll made of bronze with
integratedsheet blow box, one set of rubber covered wire
rolls incl.guide and stretcher roll and one set of LP and
Press Part with
* Suction pick-up roll and transfer felt system
* 1st nip by straight-thru press with plain top roll and
suction press bottom roll and bottom felt, linear nip
* 2nd nip by straight-thru press with plain top roll and
grooved bottom press roll and bottom felt, linear nip
* 3rd nip by straight-thru press with grooved top roll and top
felt, plain bottom press roll Linear nip pressure 100 kN/m
* 4th nip Offset press with 2 plain press rolls
Pre-Dryer Part with 6 dryer groups and totally 16 drying
cylinders 1250 mm diameter, 3 bars steam pressure, with
stationarysifons,dryer bearings with central oil lubrication
on the drivesideand manual lubrication on front side.
Felt rolls withmanualgreasing, oscillating doctors in the
1st group,pocket blow rollsmake MADELLEINE, pneumatic felt
guides andelectric stretchers,totally enclosed hood with front
sidecurtains, make BRUNSCHWEILER,year of make 1991. Rope system.
* Make MEASUREX 2002, for basis weight and moisture profile
* Make BTG, year of make 1998, with stainless steel frames,
for max.coating application of 25 g/m²
Gas-Infrared Drying System, make KRIEGER, with sectional heating
After-Dryer Part with 11 drying cylinders in 2 groups, 1 Teflon-coated dryer in the 1st after dryer group and 10 drying cylinders in the 2nd after dryer group.
QCS-Scanner, make MEASUREX 2002 for measuring of moisture, basis weight, ash, profile and colour on both sides of the sheet.
Back-to-back Soft-Nip Calander, make HUNT & MROSCOP, year of make 1989. with 2 heated rolls and 2 swimming rolls in alternating positions, including heating system.
Hydraulic Pope Reel, make ALLIMAND, year of make 2000, incl. reel-turn-up system, make TUSA, automatic reel spool storage system for 5 empty spools,
Multi-Motor drive system, year of make 1988
Steam and Condensate System, Cascade-type
2 Overhead Hall Cranes, 1 with 4t, 1 with 9t lifting capacity
Finishing House Equipment
* 1 Second-hand Slitter RewinderMake AHLSTROEM,
year of make 1987, type BRP3B,working speed
1500m/min,Reel spool unwind with hydraulic
water cooled brakes,reel diameter 1500mm.
Auto tension control, 11 slitters with drive,
manual setting knife setting.
* 2 Motor drives 103 kW/each, shaft-less rewind,
rewind reeldiameter 1525mm, reel ejection and
lowering table.Trim removal system.
* 1 Paper Baler, make SACNI with bale conveyor to broke pulper
* 1 Second-hand Reel WrapperMake TRANCEL,
year of make 1987, shrink-wrap
Starch and Coating Colour Preparation
|1||Stainless chest with top entry agitator for mixing clay.|
|1||Starch cooker, make AMYLAM, with stainless steel tank.|
|1||Jacketed and heated tank, made of stainless-steel|
Coating kitchen, make CELLIER, with two high-shear mixers
top-entry in stainless tanks.
Colour kitchen, make BRAN + LUBBE with mixers and colour
dosing stations, computer controlled.
Starch silo, 150 m³, diameter 4.32 m, height 14.10 m incl.
pneumatic conveying System
|4||Circular Vibrating Screens, make CELLIER, 900 mm diameter|
|2||Tanks, made of stainless steel with top entry mixers|