PAPER MACHINE PM1 & PM2
Print this page
- Product ID: VAK10645
- Name: PAPER MACHINE PM1 & PM2
* Producing fluting, liner and white top papers.
* The machines will run into August 2012 and are well
supported in spares and documentation.
Two Hamworthy Boilers, year 1975/1977, oil/gas fired package boilers operating at 150psi and test pressure 235psi, single burner.Boilers tested this year.
Masson Scott single side floor pick up shaftless unwind stand with Witchata water cooled brakes, width approximately 4m x 1.5m diameter.
* Various oil cooled transformers
* Spare press roll R/C for PM1
|Three Voith HD cleaner bodies with reject chambers: could be S3 or S4|
|Voith ATS 30/31 Turbo separator length 1830mm and reject outlet 175mm diameter.|
|Three camber rolls: fixed camber. Face width and diameter to be confirmed. All rolls with bearings and housings.|
|Two suction couch roll shells in bronze: width 2898mm face and 2860mm drilled face and diameter 609mm.|
|Suction couch roll 3270mm new, 3270mm face and drilled face 2950mm, diameter 762mm|
|Suction press roll r/c with bearings and housings for above roll position.|
* Drum thickeners: stainless steel drum and vat
* BCI Pulper gearbox model 3. Two units available
* Five transformers: various loadings and voltage
Voith AP 20 pulper: stainless in four sections complete with rotor assembly
* Two Maule screw presses: stainless
* Reject press for final rejects
Number two dispersion system: Esher Wyess, rated at 100t/day in present position
Pre thickening by Reiss and Krima screw inclined presses. Krima horizontal press, feed press, heating screw and Esher Wyess dispersion unit. Heating unit and dispersion unit rated at 4/t/hr
System has a BCI drum thickener with couch roll and a Lamort De Ink cell stainless steel : Verticell model 4
In base store:
Two JCO-1 refiners, one complete with fillings and other without fillings and b/housing
* Lamort Diablo model 1 in stainless steel complete with motor
* Wire baler for pulp bale wire
* Esher Wyess RS1 reject sorter
* Various stainless vacuum separators
* JCO-1 bearing cartridge
* Pulper for KLS input BCI with an inclined conveyor
* Rejects to a Trommel
PAPER MACHINE PM1
Lamort stainless steel pulper with bottom rotor HC, Poire model 3 secondary pulper with 1.6mm holes, three Lamort CH5 screens with 1.6mm holes, Comer HD cleaner, two Lamort de inking cells: Verticell model 4, capacity 480m3/hr operating at 1% consistency. Primary cell operating on 7t/hr.
SPN 12 pressure screen in stainless with 0.15mm slots. Tailing screen for pressure screen Lamort CH5 with 0.15mm slots
Maule kneader dispersion system running at 6t/hr, pre thickening presses and feed press, two Lamort model 4 Verticell stainless cells, BCI drum thickener.
Top wire has two Beloit 3000 series refiners 24” diameter auto gear loading
* Top wire pressure screen is a Voith model 20 pressure screen
* Voith KS LD cleaners
Bottom wire pulper is a BCI unit LC with a D section tub, mild steel with stainless lining, with a BCI Trashex. HD cl;eaner is a Voith ATS 21 turbo separator, refining is a Voith SDM 26”`refiner and pressure screens are two BCI 36p units in stainless with 0.2mm slots, Bauer LD cleaners.
This machine has a right hand drive sectional electric drive , cylinders are rated 100psi, speed 530m/min. This machine has a top wire as the machine produces white top as well as fluting and liner papers. Speed range 550 to 350m/min, 180 to 125gsm, deckle at slice 3200mm and deckle at reel 2850mm, sectional electric DC drive. Top and bottom wire.
* KMW headbox on bottom wire which is cantilevered.
* Top wire with Voith Jetmaster flowbox.
This wire section is cantilevered.
* Cantilever wet end in stainless, suction couch.
* Dryers are on A/F bearings with auto lub system
* Machine is equipped with an inclined size press
* Modern two roll calender stack with Kuster roll
and hydraulic loading
* Reel up for finished rolls: 2.4m diameter
Masson Scott UIA rewinder with unwind on fixed unwind stands taking a reel 2.4m diameter, rewind diameter 1500mm and rewind is shaftless.
PAPER MACHINE PM2
This machine has a left hand drive and a sectional electric drive, speed 450m/min, dryers rated 30psi, deckle at reel is 2200mm, sectional electric drive, DC. This machine does not have a size press. Speed is 415 to 200m/min,gsm 80 to 200. Production: 5t/hr.
Voith VS pulper m3, consistency 11%. Beloit Tridrive rotor, m/s tub stainless lined, Voith Trolex reject unit, two 24P thick stock pressure screens running 4.5% with 1.8 / 1.6mm holes, two Voith S3 HD cleaners, two JCO-1 refiner units, rejects to vibrating screens.
* Palmac LD cleaners,BCI 24P machine screen unit with 1.8mm holes
* Wire section:knock down wire section with a Voith K1000 flowbox
* Twin soft nip calender with hydraulic loading
Masson Scott UIA rewinder with unwind on fixed unwind stands taking a reel diameter of 1.5m diameter, rewind diameter 1500mm and rewind is shaftless.
Both paper machines have Nash vacuum systems with pumps 904, 3002 and 2000 series pumps.
* De ink systems have two Krofta units.
* Effluent Plant
* Screw press
* Disc thickener
* Belt press
* Dryness of sludge approximately 40%