TISSUE MACHINE, 2400mm, CAPACITY 18-25 Tpd
Print this page
- Product ID: VAK10642
- Name: TISSUE MACHINE, 2400mm, CAPACITY 18-25 Tpd
|Year installed in the mill 1998|
|Built in 1978|
|Type machine fourdrinier|
|Width at pope reel 2400mm|
|Speed maximum 500m/min|
|Basis weight from 18 to 30gsm|
|Capacity: from 18 - 25Tpd|
|Yankee dryer diameter 4200mm and press work 5bar|
|Drive ABB new in 1996|
* Machine erected
PAPER MAKING MACHINE
RIGHT Hand machine, the drive motors are on the right looking from the input box to the Pope
* Flat Table machine type, for tissue monofieltro
* Net width 2,400mm
* Drive speed 500m/min
* Net production 24t/day
Bruderhaus Gorostidi, all stainless steel, sealed, pressurized with automatic pressure and level, complete with irrigation, cover cleaning and command and control box
Gorostidi flatbed, all stainless steel, cantilever, and tracheal motor of 7.5kW and variable speed
* 1 box Forming
* 5 Boxes of foils of 5 strips each
* 2 Boxes of 4 strips vacufoils complete with
separator and vacuum fan
* 1 Box wet 800 mm wide complete with separator and vacuum fan
* 4 Boxes Applicants, complete with separators vacuum
manifold and valves
* Applicant 1 Cylinder, cantilever, 650mm in diameter
* 1 Cylinder Tractor 500mm in diameter
* Tela 1 circuit complete with guide, tensioner, rollers,
doctors, and irrigation
Pick-up 1 Felt Felt Tour Pick-up complete with guide rollers, tension rollers with pneumatic motor HP monojet irrigation and low pressure regdíos. 2 boxes of felt conditioning with separator, 2 Boxes of Yankee drying before your separator rollers, doctors and trays. Pick-up 1 full sitema consumer outreach and further separation by air motor.
2 presses presses against the Yankee diameter 500mm complete with hydraulic pressure system, including the hydraulic unit.
Yankee Yankee 1 cast of 4,200mm in diameter, complete with steam supply system and extraction of condensates to work at 4bar. Grinding and packed on a cot
Bell 1 Bell blowing hot air against the Yankee, with 4 built-in fans to own hood and an exhaust fan outside, with 4 air heating batteries new, special tissue paper, and designed to operate at 12bar pressure of steam and blowing air to get against Yankee 160ºC and 75m/s. The hood is complete with pneumatic retraction system, CCM and control.
Doctors Doctors 3 new anti-Yankee, with oscillation electromechanical and pneumatic loading system.
Pope Pope reel 1 reel drum 900mm in diameter, complete with 10 metal reels, pneumatic loading system.
|Level 1 box of pasta, made of stainless steel|
|1 Valve weight of gate angle|
|1 Fan TURO powered pump 132 kW 380V/50Hz.|
|1 LaMorte LICAR closed Debugger SP-800 with holes and a basket of spare slots basket, complete with motor, 380V/50Hz, drive belts and pulleys.|
|1 Pump TURO supply to the Stage 2 engine cyclone complete with 380V/50Hz|
|1 Pump TURO supply to the Stage 3 engine cyclone complete with 380V/50Hz|
|1 Debugging Cyclone 4-stage low consistency GL & V mark with Cleanpac cyclones 700, while stage 4 consists of 2 FIBERMIZER. Complete form satellites|
|1 flat screens LICAR LaMorte, model T-20 engine complete with 380V/50Hz and irrigation|
* 3 water pumps powered cast of 11 TURO kW/1500 rpm, 25rpm
and 5.5kW/1500rpm kW/1000 all 380V/50Hz.
* 1 fresh water pump to power the circuits Medium Pressure,
complete with 380V/50Hz motor.
* 2-piston pumps for high pressure water mark CAT 3545 and
2530 model, complete with 380V/50Hz motor
Circuit of steam:
Full steam system from a general collector of steam is fed from the boiler. Yankee steam distribution and Bell, with its control system and pressure differential control and control panel. 2 condensate pot with level control and 2 vacuum pumps with 3kW/1500 engine rpm. 380V/50 Hz
Complete installation of vacuum formed by 3 vacuum pumps liquid ring SAFEM brand, model AL20, AL30 and AL40, each connected to a sequential pneumatic separator, and a general manifold vacuum. All pumps with electric motors of 74kW, 132kW and 132kW, all driven 380V/50Hz pulleys and belts
1 roll for tissue, equipped with 2 tape splicers controlled unwinding speed, drive speed 1,000m/min, complete with drive, control panel and CCM. 2 Operated by AC motors with variable speed and ABB control equipment. The engines are 37kW each 380V/50Hz. CCM and control
* 1 Table Cloth
* Several motors
* Roller Presses
* Rolls of felt and fabric
Once you proceed with the dismantling of the factory will list all equipment and other items that are replacements
Together with the drive machine to provide current, formed by the AC motors include:
* Applicant cylinder 90kW
* Roller Tractor 132kW
* Yankee 132kW
* Pope 37kW
This drive supplied by ABB in recent times, will be dismantled under the supervision of ABB, which shall review the documentation, prepare the engineering for installation in the country. The engines can work either 50Hz or 60Hz and 400V or 440V.
The reel also has a drive identical to the machine.