Paper Mill for MG Paper 2340mm, 65tpd
-
Print this page
- Product ID: VAK10472
- Name: Paper Mill for MG Paper 2340mm, 65tpd
- Year: 1998
- Capacity: 65 tpy
PAPER MILL FOR MG PAPER
GENERAL DATA
* Paper mill for making paper for light wrapping, alimentary
wrapping, glaze paper,…
* Installation year of the machine :1998
* Paper machine trim width :2340 mm.
Working speeds:
– 350 mpm at 40 gr/m2.(max)
– 120 mpm at 120gr/m2.(min)
– 280 mpm at 70 gr/m2.(best)
Output capacity :65 TPD
Average production :55 TPD
Stopped in August :2006
HEAD OF MACHINE CIRCUIT
* Fan pump of 132kw.
* GL&V Cleaners in three stages.
* LICAR-LAMORT SP-800 with motor of 22/25kw.
(primary head of machine screen)
* LICAR-LAMORT Diabolo screen.
(secondary head of machine screen)
* 1 Vibrating screen T-20 of 1 X 2m.
(tertiary head of machine screen)
PAPER MACHINE
Wire section
Type :Fourdrinier.
With shaking motor power :10 CV.
Headbox with 2 rectifier rolls.
Manufacturer :Bruderhaus.
Lip width :2500 mm.
Press section
* Pick-up press with suction of 650 mm. diam.
and 2.990 mm. width
* Bi-nip press with central roll and two contacts.
– 1st nip with two suction areas of high and low vacuum
and working pressure of 30 kg/cm. 2.990 mm width and
650 mm diam.
– 2nd nip press with top felt and working pressure
of 45 kg/cm. 2.700 mm width and 640 mm diam.
– Central roll of 2.800 mm width and 1.000 mm diam.
Drying section
5 Dryers of 1500 mm diam. and 2650 mm face width (without including the rope throat)
Test pressure :8kg/cm2.
Max. working pressure :5Kg./cm2
MG Cylinder
* 1 MG Cylinder of 4.200mm diam. and 2.650mm face
width + 10mm. rope throat
Pope reel
* Standard pope reel with primary and secondary arms.
Drive
* Multimotor drive with 7 ABB motors.
Suction roll :90kw
Wire :132kw
Press 1 :90kw
Press 2 :50kw
Dryers :90kw
MG Cylinder :132kw
Pope reel :37kw
SUPERCALENDER STACK:
Manufacturer | Unknown, completely rebuilt by Gorostidi |
Face width | 2250mm |
Noof rolls | 12 |
Top and bottom rolls of fixed crowning | Face width 2250mm and 500mm diam. |
Middle rolls of | 2550mm face width and 320mm diam. |
* Unwinding stand for machine spool with standard
tambour brake.
* Rewinding against drum. Pope type.
* Drive with only one INDAR motor.