Paper mill producing filter papers
This product is not available at the moment. Please contact our customer service for more info.
Print this page
- Product ID: VAK10820
- Name: Paper mill producing filter papers
Paper Mill Producing Filter Papers
There is a communal stock preparation system for all four paper machines.
The furnish used is cellulose and fibre glass pulps.
Voith 1: diameter 3.8m, capacity 20m3.
Voith 2: diameter 4.45m, capacity 32m3.
The pulpers are stainless steel, batch operation and low consistency operation. Bottom rotors with perforated plates.
Two stainless steel pulper dump chests with side entry agitators.
In line Beloit magnetic trap for pulp bale wires.
Two Claflin 101 refiners driven via a gearbox drive.
Six stainless steel Bertrams beaters not in use. 500 lbs capacity.
Sheetmaker and shopper freenes unit.
1. CL Paper machine
Deckle 500mm, speed range 2 to 20 m/min, gsm produced 18 to 120. The machine has a wet end comprising of a mould and VAT former.
RTI tester, smoothness and porosity tester, thickness testers, tensile tester.
Auto core cutter.
2. EH Paper machine
Stock prep with LD cleaners and Valmet horizontal pressure screen TAS 25.
Deckle 1000 mm, speed range 2 to 30 m/min, gsm produced 50 to 700. The machine has a wet end comprising a mould and vat former.
3. YK Paper Machine
Approach flow with LD cleaners. Prior to flowbox and Octopus unit for dilution control at the flowbox.
Deckle 1500mm, speed range 5 to 60 m/min, gsm produced 50 to 300. The machine has a wet end comprising of a fourdrinier wire.
4. KT Paper Machine
Deckle 1500mm, speed range 10 to 70 m/min, gsm produced 50 to 300. The machine has a wet end comprising of a mould and vat former.
Krieger pre dryer.
Automatic flying splice reel up.
Laboratory: Tensile tester, two thickness testers and balance.
Parkland: width 0.65m, roll diameter 0.6m.
Cameron 1: width 1.50m, roll diameter 1.3m.
Cameron 2:width 1.50m, roll diameter 1.5m.
Dixon: width 0.48m, roll diameter 0.32m.
Off machine calender by Hunt and Moscrop, hydraulic operation and two roll design.
Belt press for final sludge thickening by Charlston Engineering.
Oil fired boiler with a single burner.